View Full Version : Does this look OK for a PCB?
RoboPimp
05-06-2006, 07:17 AM
http://userweb.suscom.net/~omacdonald/images_2/LPB.gif
I'm gunna try to make my own PCB soon, does this one look like it will work ok ?
any info or tips, etc would be greatly appreciated!
AMZ-FX
05-06-2006, 08:03 AM
Just remember to use a mirror image when you apply it to the copper board to etch!
regards, Jack
Cosmic_Monkey
05-06-2006, 08:55 AM
If you don't mind me asking, what is it?
RoboPimp
05-06-2006, 09:21 AM
I copied my layout from general guitar gadgets. This is what theirs looks like:
click here (http://www.generalguitargadgets.com/diagrams/lpb2_lo.gif)
how can I tell which way the PCB is transfered.
BTW: I'm still not 100% sure on this "IP" issue so if posting that pic is wrong just say so.
dan-o-guitar
05-06-2006, 09:40 AM
Originally posted by RoboPimp
I copied my layout from general guitar gadgets. This is what theirs looks like:
how can I tell which way the PCB is transfered.
BTW: I'm still not 100% sure on this "IP" issue so if posting that pic is wrong just say so.
Just put a link to the site instead of the pic, makes everybody happy.
DIYethic
05-06-2006, 10:29 AM
just make sure those traces and pads are big enough for soldering... its a PITA when they aren't. :mad:
RoboPimp
05-06-2006, 11:40 AM
Originally posted by DIYethic
just make sure those traces and pads are big enough for soldering... its a PITA when they aren't. :mad:
can anyone recommend a min. thickness for pads, traces?
Bruce Bennett
05-06-2006, 05:34 PM
looks fine to me.
I remember when I used to make PCBs at school... They don't look cool unless all the tracks are at right angles! :mad:
Ray18
05-06-2006, 07:54 PM
I drew mine with sharpie!